Canon Rebel Auto Upload Pics Over Wifi

Getting started

The procedure for using the Wi-Fi function to send images from a camera to a computer is explained in the following iv steps. Go on in order from Pace ane.

Stride 1: Preparing necessary items

Step 2: Performing basic camera settings

Footstep three: Connecting the camera to the computer

Footstep iv: Sending images to the computer

Step ane: Preparing necessary items

1. Check the computer`south requirements.

The camera can connect to the following computers via wireless LAN.

	Windows	Macintosh
Os	Windows viii Windows 7*1 Windows Vista*two Windows XP Professional / Dwelling Edition*3	Mac Bone Ten 10.six.viii, 10.7, 10.8
Computer	PC with one of the above Bone preinstalled and a USB port every bit a standard feature (Upgraded machines non supported) * .Internet Framework 3.0 is required *iv	Macintosh with one of the in a higher place Bone installed and a USB port equally a standard feature
CPU	Pentium i.3GHz or higher	Intel processor
RAM	Minimum 1GB *5	Minimum 1GB
Interface	Hello-Speed USB	Hi-Speed USB
Display	Screen resolution: 1024 768 or more Color quality: Medium (sixteen fleck) or more	1,024 x 768 resolution or college Colors: Thousands or more than

*1 Compatible with 32-chip or 64-bit systems for all versions except Started Edition.
*2 Compatible with 32-bit/64-bit systems for Service Pack 1 and Service Pack ii except Started Edition.
*3 Compatible with Service Pack 3.
*four .Net Framework is Microsoft software. It is installed together with EU.
*5 For Windows seven 64-scrap systems, minimum of 2 GB.

two. Ostend that an access indicate base unit (Wi-Fi router, etc.) is connected to the computer.

Annotation

• A router is a device that creates a network (LAN) structure for connecting multiple computers. A router that contains an wireless function is chosen a wireless (LAN) router.
• This folio will refer to all wireless routers and base of operations stations as "access points".
• When unsure of your computer setup, refer to the user manual provided with the computer.

3. Make sure that the included EOS Utility software is installed on your figurer.

IMPORTANT

• Settings may non be possible with older versions of the software. Delight install the software from the CD-ROM included with the camera.

Stride ii: Performing basic photographic camera settings

The following settings must be performed before the cameras Wi-Fi fuction is used.

1. Fix the cameras power switch to <ON>.

2. Press the <Menu> push button to display the menu screen.

3. Press the <

> button to select [Wi-Fi] nether the [
] tab, then printing <
>.

4. Select [Enable], and then press <
>.

[Wi-Fi function] tin can now be selected.

REFERENCE

Set [Machine power off] nether the [
] tab to [Disable].

• If the cameras motorcar power off is activated during the wireless LAN connection, the wireless LAN function will turn off. Wireless LAN connection is restored when the camera wakes up from auto power off.

5. Select [Wi-Fi function] under the [
] tab, then press <
>.

REFERENCE

When setting upwards Wi-Fi for the first fourth dimension, the camera nickname registration screen will exist displayed.

When the camera is connected to another device via a wireless LAN, the nickname will be displayed on the device. Be sure to set a nickname for your photographic camera.

Select [OK] and and and so enter a nickname (up to sixteen messages and numbers).

Press the <MENU> push when finished.

Select [OK] on the confirmation screen, then press <
>.

The nickname is registered, and the [Wi-Fi function] screen will announced.

Annotation

Virtual Keyboard Operation

• Switching to other input areas

To switch betwixt top and bottom input areas, press the <Q> push.

• Moving the cursor

To move the cursor, press the <
> primal in the top area.

• Entering text

In the bottom input area, press the <
> or <
> fundamental to select characters and press <
> to enter them. You lot can check how many characters you have entered, and how many more tin can be entered, by referring to [*/*] on the upper right of the screen.

• Deleting text

Press the <
> button to erase 1 character.

• Finishing text entry

Printing the <MENU> button to confirm what you lot accept entered and exit. If a confirmation screen is displayed, select [OK] to exit.

• Canceling text entry

Printing the <INFO> button to abolish text entry and exit. If a confirmation screen is displayed, select [OK] to exit.

half dozen. The [Wi-Fi function] screen volition be displayed.

This concludes the basic camera settings.

Step 3: Connecting the camera to the computer

ane. Select [
], and so press <
>.

2. Select the Wireless setting method, and connect to the admission betoken using i of the following methods.

For admission points that support WPS:

3A Piece of cake Connection via WPS (PBC Mode)

3B Easy Connexion via WPS (PIN Fashion)

For access points that practice not back up WPS:

3C Manual Connection by Searching Networks

NOTE

• WPS (Wi-Fi Protected Setup) is a structure for simplifying settings when connecting ane wireless LAN device to another.

- In pushbutton connection mode (PBC mode), the camera and the access betoken tin exist connected simply by pressing the WPS button on the access point.

-In PIN code connection mode (PIN style), an viii-digit identification number specified on the camera is set at the admission point to found a connectedness.

• Refer to the user guide provided with your access bespeak to bank check if it supports WPS.

3A Piece of cake Connection via WPS (PBC Mode)

NOTE

• Cheque the position of the WPS push button on the access point in advance.

3A-1. Press the <
> central to select [WPS (PBC fashion)], and then printing <
>.

Select [OK] and press <
> to go to the adjacent screen.

3A-2. Press the access points WPS button.

Annotation

For details nigh where the WPS button is located and how long to press it, refer to the access points educational activity manual.

3A-3. Select [OK] and press <
> to establish a connection with the access bespeak.

When a connection with the admission point is established, the [IP accost set up.] screen is displayed.

3A-4. Press the <
> primal to select the automated IP address setting method, so press <
>.

Select [OK] and press <
> to get to the side by side screen.

If you have completed the settings upward to this point, proceed to Step 4. .

3B: Easy Connection via WPS (Pin Mode)

Important

If stealth functions of the access point are enabled, connection may be disabled. Deactivate stealth functions.

3B-1. Press the <
> cardinal to select [WPS (PIN manner)], and then press <
>.

Select [OK] and printing <
> to go to the next screen.

3B-two. At the admission point, specify the eight-digit PIN code displayed on the cameras LCD monitor.

Annotation

For instructions on setting Pin codes at the access point, refer to the admission points didactics manual.

Later on the PIN code is specified, select [OK] and press <
>

3B-iii. Select [OK] and press <
> to establish a connexion with the admission point.

Notation

• It may take approx. one minute to found a connection.

When a connectedness with the admission point is established, the [IP address ready.] screen is displayed.

3B-4. Press the <
> key to select [Auto setting], then press <
>.

Select [OK] and press <
> to get to the next screen.

If you have completed the settings upwards to this signal, please proceed to Step 4.

3C: Transmission Connexion by Searching Networks

3C-1. The admission point`south SSID, security method, and encryption key are all necessary for connexion. Refer to the user guide included with your access signal to expect upwardly information on SSID, Security method/encryption method, and security keys.

Note

• SSID-Numbers and letters used to identify a specific existing access bespeak. This is also called the "access indicate proper name" or "network name".
• Security method/encryption method is the method for encrypting data during wireless transmission.
• Encryption key (network primal) is the key used when encrypting data during wireless transmission.

3C-2. Press the <
> key to select [Find network], then press <
>.

Select [OK] and press <
> to go to the next screen.

3C-3. Press <
> to enable the selection of an access point, select the desired access point, and so press <
> once again.

Select [OK] and press <
> to go to the next screen.

Indicates whether the device is in infrastructure or advertizement hoc manner.

An icon is displayed if the admission indicate is encrypted.

Starting time nine characters of the SSID.

Channel used

NOTE

REFERENCE

This camera supports the following options for [Authentication] and [Encryption settings]. Therefore, the encryption used by the admission betoken should be one of the post-obit.

[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK

[Encryption settings]: WEP, TKIP, or AES

3C-four. Press the <
> key to select the format and the number of characters used for the key, so press <
>.

Select [OK] and press <
> to go to the next screen.

REFERENCE

If WEP encryption is used past the access bespeak, the [Key alphabetize] screen is displayed.

Select the primal index number specified for the access point, then printing <
>.

• Select [OK] and press <
  > to go to the screen shown in stride 3C-iv.

3C-5. Enter the encryption fundamental using the virtual keyboard.

After a connection to the access point has been established , the [IP address set.] screen will be displayed.

3C-6. Press the <
> key to select [Motorcar setting], then printing <
>.

Select [OK] and printing <
> to go to the next screen.

REFERENCE

[Motorcar setting]

• Configures the settings available in [Transmission setting] automatically. Yet, this option can but be used in environments using DHCP servers, or access points or routers with DHCP server functionality, such that IP addresses and related settings are assigned and configured automatically. If an mistake is displayed even though the IP accost and related settings is set to exist automatically assigned and configured, select [Manual setting].

[Transmission setting]

• When y'all have finished entering information, press the <MENU> button. A confirmation screen is not displayed.

If yous take completed the setting up to this point, continue to Stride 4. .

iv. four. Employ the provided Pairing Software contained in the arranged software to establish a connection between the photographic camera and a estimator.
Press the <
> key to select [OK], then printing <
>.

Important

• [Pairing Software] is installed automatically during "easy installation" of the software provided with the camera. If it is not installed, install it on the computer to exist continued to the photographic camera in accelerate.
• Windows 8/seven/Vista Users:

When operating the camera remotely using EOS Utility, perform the operations equally follows earlier starting the [Pairing software]. If these operations are non performed, the [Pairing Software] may not beginning.

Open the [C Drive] > [Plan Files] > [Canon] > [EOS Utility] > [WFTPairing] binder (in this order), so double-click the [WFT FirewallSettings] icon. (The folder names above are examples. The location of files differs according to the environs.)

v. The following message is displayed. "******" represents the last six digits of the MAC address of the photographic camera to exist continued.

6. Commencement the pairing software.

• Ordinarily, it is installed in the aforementioned location as EOS Utility.

7. After the pairing software starts upward, an icon is displayed on the task bar. When the camera is detected, a message is displayed.

viii. Double-click the pairing software icon.

9. Detected cameras are listed. Click [Connect].

Note

• Cameras that take already been connected are not included in the listing.
• If multiple cameras are displayed, identify the camera to connect to by its MAC accost displayed on the cameras LCD monitor.

ten. When the photographic camera detects the computer on which you clicked [Connect] in footstep 9, the screen below is displayed.

Printing the <
> key to select [OK], then printing <
>.

11. Select [OK] and press <
> to salve the settings.

REFERENCE

• To change the name of the settings, select [Settings proper noun] and press <
  >.

12. Later the connection has been established, the [
Connection] screen is displayed.

NOTE

There is no demand to complete pairing again if you will continue using a particular camera and computer together after pairing without changing the settings.

To reconnect to the same computer, but turn on the camera and start the pairing software. The connexion between the camera and computer will be established automatically.

This completes the procedure for connecting the camera with a computer.

Stride 4: Sending images to the computer

1. EOS Utility will get-go up.

If EOS Utility does not start up automatically, Click the [Kickoff] button > [All Programs] > [Canon Utilities] > [EOS Utility] > [EOS Utility].

Notation

For Mac OSX, click the [EOS Utility] icon on the Dock.

• If the AutoPlay screen is displayed, click [Downloads images from EOS camera].

2. The following screen will exist displayed. Click
[Starts to download images], or
[Lets yous select and download images].

*The chief window displayed differs depending on the connected camera.

NOTE

The downloaded images are sorted by date into folders and saved in the [My Pictures] binder by default.

To alter the save destination, click [Preferences] and use the displayed dialogue box to choose a different destination.

3. If you selected [Lets you select and download images] in step iii, a viewer window will announced and the images in the memory card will be displayed.

Select the desired images from the listing by appending them with a checkmark, and then click [Download]. (Four images have been selected in the example below.)

NOTE

4. The [Download image] dialog box appears. To alter the relieve destination click [Destination Folder...] and set a new save destination in the dialog box displayed.

Click [OK].

5. The images will exist downloaded to the calculator.

half dozen. When all images have been downloaded, DPP starts up automatically and the downloaded images are displayed in DPPs main window.

Annotation

• To apply Digital Photograph Professional or ImageBrowser EX for prototype editing or other operations, refer to the PDF pedagogy manuals on the CD-ROM included with the camera.

This concludes the procedure for downloading images from the camera to a computer.

colemanmeren1965.blogspot.com

Source: https://support.usa.canon.com/kb/index?page=content&id=ART141700

Share this post